NEWS / ARTICLE

Home / News / Article

2 MP, 4K, 25 fps: how to read camera specifications

284 wordsKnow-how

A camera spec sheet is full of numbers and terms that are easy to gloss over. These quantities constrain one another, and once you see the relationships, it becomes clear which ones matter for a given site. This is a plain-language reading of the usual parameters.

Resolution, frame rate, bitrate

Resolution is the pixel count behind terms like 2 MP, 8 MP, 1080p or 4K, and it sets how much detail a frame can hold. Frame rate is how many frames are captured per second; higher values keep fast motion smoother, though a moderate value is usually enough for general surveillance. Bitrate is the encoded data per second, driven by resolution, frame rate, codec and scene complexity — and it directly drives the storage and bandwidth discussed elsewhere. Push the quality up and capacity and network load rise with it.

Features tied to "can you see it"

  • Wide dynamic range: balances bright and dark areas in high-contrast scenes such as doorways and windows.
  • Low-light and illumination: governs night performance; infrared has a real effective range, so look beyond the headline figure.
  • Codec: newer codecs save bitrate at equal quality, but check that the NVR and platform can decode them.
  • Lens focal length: sets the viewing angle and effective reach, and often affects the real result more than raw resolution.

Choose for the scene, not the spec sheet

A doorway needs a clear face, a perimeter needs an overview, a counter needs detail — each calls for different priorities. Our habit is to define first what a given point must actually capture, then set parameters, and work out bitrate, storage and bandwidth at the same time. Specs serve the requirement; higher is not automatically better.

← Back to news Have a similar need? Talk to us