NEWS / ARTICLE

Home / News / Article

How long should recordings be kept, and how much storage is enough

278 wordsKnow-how

Storage is easy to get wrong when scoping a system: too little and you miss the retention target, too much and the budget balloons. The logic is not complicated once a few quantities are clear. This is a general method — plug in the figures from your own devices.

What determines the capacity

It comes down to one multiplication: the space a recording occupies is roughly bitrate times time times channel count. Bitrate is the data each camera produces per second, set by resolution, frame rate, codec and scene complexity; time is the retention period converted to seconds; channels are the cameras recording at once. Multiply them and convert to terabytes for a raw figure.

Factors that change the result noticeably

  • Codec: newer codecs cut bitrate at equal quality, so a generational change can shift capacity a lot.
  • Recording schedule: continuous recording and motion-only recording differ greatly; time-based schedules need their own calculation.
  • Constant vs variable bitrate: VBR rises and falls with scene activity, so leave headroom in the estimate.
  • Redundancy and formatting: RAID consumes some bays, and a drive's advertised capacity is not its usable capacity.

Do not forget overwrite, and keep a record

Most systems run on "when full, overwrite the oldest footage", so what you really need to set is the minimum retention, not how much the disks can hold. At handover we log each recorder's bitrate settings, retention target and actual usable days, so a later review or expansion does not mean starting from scratch.

An estimate is a starting point. Watch real usage for a week or two after go-live and then calibrate — that beats trying to be exact on day one.

← Back to news Have a similar need? Talk to us