This is a summary of publicly available industry information, not a Feikui project update. The source and a link to the original record are given below. A standards transition affects both platform integration and device selection, so it is worth noting for anyone running networked surveillance.
What the standard says
The recommended national standard GB/T 28181-2022, "Technical requirements for information transmission, switch and control in video surveillance networking system for public security", was issued on 30 December 2022 and took effect on 1 July 2023, fully replacing GB/T 28181-2016. It is administered by the Ministry of Public Security and developed by SAC/TC100.
Selected published points
- GB/T 28181-2022 is a recommended national standard, currently in force; issued 2022-12-30, effective 2023-07-01, fully replacing the 2016 edition.
- Administered by the Ministry of Public Security, developed and executed by TC100; Chinese standard classification A91, ICS 13.310.
- It specifies the interconnection architecture, basic and security requirements for transmission, switching and control, and the control and transmission procedures and protocol interfaces.
- It applies to the design, testing, acceptance and related equipment development of public-security video surveillance networking systems.
Why it matters for O&M
A networking standard is the layer most often dealt with when platforms and upper- and lower-level systems interconnect, so a version change means re-checking which edition each device and platform supports. When we survey a site, we record the access protocol and its version alongside models, firmware and addresses; that register pays off during cascading commissioning or expansion. A standards update is another reminder of the same old lesson — get the basic records right and upgrades are far less stressful.
Source: National Public Service Platform for Standards, GB/T 28181-2022 record. Read the original.